run time

Example Personalities for R Series Intelligent DAQ LabVIEW Developers Feature Brainstorming In some documentation it says that you can install more than one RunTime engine for older versions of LabView eg I have a dll which wasmade using v7.1 and I now have 8.2.1. When i call it from visual basicit complains that I need the older run time engine. Ok so I downloadit but when I try to install it it won't let me since I already have alater (8.2) run-time engine installed!!!Any thoughts?Hardy The only way I know of to have multiple versions of the RTE installed is to install them in order. Unfortunately that means you have to uninstall the newer one(s). I'd sure like for someone to chime in with an anternative though. Matt I'm not sure about that but it might help installing an application (including run-time engine) built in 7.1. Daniel Hello all,A few customers have run across this error specifically with the LabVIEW 8.2 Run-Time Engine. However at this point we have been unable to reliably reproduce it. We've tried installing the LabVIEW 8.2 Run-Time Engine on a clean machine followed by installing the LabVIEW 7.1 Run-Time Engine and it seemed to install fine. We've also tried with LabVIEW 8.2.1 and 7.1.1. If you have an idea regarding how to reproduce this error please post it here. Some customers have found that in the past installing an application that includes the LabVIEW 7.1 Run-Time Engine as mentioned above by Dan has solved the problem. The other alternative is to uninstall the LabVIEW 8.2 Run-Time Engine and install the previous Run-Time Engines as Matt suggested above. Thank you all for your contributions!Regards,Erik J. Applications EngineerNational Instruments I just tried to install the LVRTE 7.0 onto my development machine (7.1.1 and 8.2.1 installed already)and got the attached error. My experience has been that any RTE install will abort if there is alreadya newer version installed. Were there changes to 8.2.1 to allow an earlier version to install? Thanks. Matt Message Edited by Matthew Williams on 11-19-2007 07:14 PM Thank you for your post Matt. It appears that if a later version of the development environment is already installed then a run-time engine of an earlier version will abort. However it seems that if the machine has only run-time engines on it you should be able to successfully install previous versions. LabVIEW 8.2.1 will still show this behavior. Unfortunately at this time the best solution is to uninstall the newer versions of the LabVIEW Run-Time Engine. However we are looking into fixing this problem in future versions of LabVIEW. Thanks again!Regards,Erik J. Message Edited by Erik J on 11-20-2007 10:54 AM By using this web site you accept the for this web site. Please read these carefully before using any part of this site. Please go here for information on ni com’s.

Forex Groups - Tips on Trading

Related article:
http://forums.ni.com/ni/board/message?board.id=170&message.id=284922#M284922

comments | Add comment | Report as Spam

The views expressed in this blog are those of the individual and do not necessarily represent those of Microsoft. This information is provided by way of general information only and should not be relied on without obtaining independent expert advice. These postings are provided "AS IS" with no warranties and confer no rights. You assume all risk for your use. Once our Microsoft Dynamics CRM system has been configured with the required duplicate detection settings and the duplicate detection rules we can start detecting duplicates. Let us go through a grade of steps to see how run-time reproduce detection can be made to bring home the bacon. So we are all set for our run-time reproduce detection. Now we be to detect duplicates during create/update of records in Microsoft Dynamics CRM. Titan introduces a notion of Optional Parameters that can be used to go optional information to each of the SDK Methods. The run-time duplicate detection feature also makes use of an optional parameter. Let us see how. 1. Duplicate detection will not work with the act or modify methods of CrmService disapprove. It ordain work with kill method only. 2. Optional parameter PersistInSync is used to keep generating match-codes synchronously with the record creation. This makes reproduce detection real-time and is useful when pumping-in records in bulk. However persisting match-codes synchronously may create the throughput of act/Update calls to go drink. The default value for CreateDuplicates optional parameter is adjust in order to keep parity with V3 behavior. If the parameter is not specified or set as adjust then the record gets created without a reproduce check. The fail determine for PersistInSync optional parameter is false as it gives a better throughput for the create/modify SDK call. The flip side however is that the reproduce detection is not real-time and duplicates of newly created/updated records may not get reported unless their match-codes have been updated by the periodic asynchronous job responsible for updating match-codes. authorise so far so good. I have got an exception saying that the record I am trying to create/update is a reproduce. But now how do I fetch the record(s) of which my preserve is a potential duplicate? Don’t mind; we have one more SDK method to help solve your problem! Once you experience that the record you are trying to create is a duplicate you can fetch the duplicates of that record using RetrieveDuplicates SDK message. The matching entity name can be specified based on the published rules for a base entity. E g in our case we have a published duplicate detection rule for account entity where matching entity is also be. So we fetched all the accounts in the system of which our preserve is a duplicate. gratify refer to the appendix for more details. Note: The run-time duplicate detection and the records returned by RetrieveDuplicates method are privilege driven. So the run-time duplicate detection may not report a duplicate if the user does not have read privilege on the duplicate record change surface though it is there in the system. For the custom tool the affiliate wants to build as soon as a duplicate record found exception is caught the RetrieveDuplicates SDK communicate can be used to find the duplicate records already in system. Then these records can be handled as per the requirement like updating the existing record with any new information that the incoming record may have. Alternatively other rules/schemes could be used to merge the set of duplicate records. This is how simple it is for you to use the reproduce detection SDK and build custom applications on top of it! It is extremely powerful and at the same time ever so naïve and flexible to use!

Forex Groups - Tips on Trading

Related article:
http://blogs.msdn.com/crm/archive/2007/11/12/part-ii-run-time-sdk-support-for-duplicate-detection-in-titan.aspx

comments | Add comment | Report as Spam

The views expressed in this communicate are those of the individual and do not necessarily represent those of Microsoft. This information is provided by way of general information only and should not be relied on without obtaining independent expert advice. These postings are provided "AS IS" with no warranties and confer no rights. You assume all risk for your use. Once our Microsoft Dynamics CRM system has been configured with the required reproduce detection settings and the duplicate detection rules we can start detecting duplicates. Let us go through a sequence of steps to see how run-time duplicate detection can be made to bring home the bacon. So we are all set for our run-time reproduce detection. Now we need to detect duplicates during act/update of records in Microsoft Dynamics CRM. Titan introduces a notion of Optional Parameters that can be used to pass optional information to each of the SDK Methods. The run-time duplicate detection feature also makes use of an optional parameter. Let us see how. 1. Duplicate detection will not work with the Create or modify methods of CrmService object. It ordain work with kill method only. 2. Optional parameter PersistInSync is used to keep generating match-codes synchronously with the record creation. This makes duplicate detection real-time and is useful when pumping-in records in bulk. However persisting match-codes synchronously may cause the throughput of Create/Update calls to go down. The fail value for CreateDuplicates optional parameter is true in order to act parity with V3 behavior. If the parameter is not specified or set as adjust then the record gets created without a duplicate check. The default value for PersistInSync optional parameter is false as it gives a better throughput for the create/update SDK call. The turn side however is that the duplicate detection is not real-time and duplicates of newly created/updated records may not get reported unless their match-codes have been updated by the periodic asynchronous job responsible for updating match-codes. Okay so far so good. I have got an exception saying that the preserve I am trying to create/modify is a duplicate. But now how do I channel the record(s) of which my preserve is a potential reproduce? Don’t worry; we have one more SDK method to help understand your problem! Once you experience that the preserve you are trying to create is a duplicate you can fetch the duplicates of that record using RetrieveDuplicates SDK message. The matching entity name can be specified based on the published rules for a base entity. E g in our inspect we have a published duplicate detection rule for account entity where matching entity is also account. So we fetched all the accounts in the system of which our record is a duplicate. gratify refer to the appendix for more details. Note: The run-time duplicate detection and the records returned by RetrieveDuplicates method are allow driven. So the run-time reproduce detection may not report a duplicate if the user does not have read privilege on the duplicate preserve even though it is there in the system. For the custom tool the affiliate wants to build as soon as a duplicate record open exception is caught the RetrieveDuplicates SDK message can be used to find the duplicate records already in system. Then these records can be handled as per the requirement like updating the existing preserve with any new information that the incoming record may have. Alternatively other rules/schemes could be used to merge the set of duplicate records. This is how simple it is for you to use the duplicate detection SDK and build custom applications on top of it! It is extremely powerful and at the same time ever so naïve and flexible to use!

Forex Groups - Tips on Trading

Related article:
http://blogs.msdn.com/crm/archive/2007/11/12/part-ii-run-time-sdk-support-for-duplicate-detection-in-titan.aspx

comments | Add comment | Report as Spam

is a community site devoted to programming in C++ using the developed by. Over 95 percent of questions asked here gets answered. If you are looking for information about Qt related air — and affix your challenge. You are currently viewing our boards as a guest which gives you only read-only access. By joining our free community you ordain able  to post messages go away new threads communicate privately with other members (PM) respond to polls upload content and find other features of our site. Registration is abstain simple and absolutely remove so gratify. ! If you have any problems with the registration process or your account login please communicate. Hi,I have a main window in my program and when I move on a button it create a child window. I need to call back the main window when I move the child window. How can I do it?gratify back up me. What do you want to do? You could for example install the main window as an on the child window and catch QEvent::Move. Hi,I need that. I undergo a schedule and when I click on a button it load another window and it include a picture. The probs is that when I move the child window then the old lay of the window hold the conceive of of that child window i think its memory probs. But when we refresh the mainwindow it cleare that unwanted conceive of. So I need to refresh the screen when i act the child window. Or please furnish another solutions for this. Please back up me The probs is that when I move the child window then the old lay of the window direct the conceive of of that child window i think its memory probs. But when we refresh the mainwindow it cleare that unwanted picture. So I need to call back the screen when i act the child window. The underlying window system ordain displace paint events when a window underneath is exposed. You must be doing something weird. Do you undergo any custom widgets in your main window that show this garbage? Could we see the slot that is connected to the button? Powered by vBulletin Version 3.6.7 Copyright &write;2000 - 2007. Jelsoft Enterprises Ltd., vRewrite 1.5 SEOed URLs completed by and. The Qt by logo is used with convey permission of Trolltech ASA. Qt the Qt logo and Trolltech are registered trademarks of Trolltech ASA.

Forex Groups - Tips on Trading

Related article:
http://www.qtcentre.org/forum/showthread.php?t=10197

comments | Add comment | Report as Spam

I'm attempting to duplicate the copy used by the GlobalBank obtain example to use the translation function to manage mapping data objects to business objects however i keep running into issues with what appears to be caused by run time exceptions in the ObjectBuilder dll related to the usage of the InjectionContructors. I'll try to make this as alter as possible with my usage here but if any one would desire the whole project i'd be more t han happy to send it over. Basically i undergo a enjoin write of the EFT. SeviceProxies service folder from the GlobalBank solution for the generic translation classes it has and an EmploymentService folder that contains my proxies to my web service (these work fine). My translator categorise: public class EmploymentTranslator : EntityMapperTranslator<EmploymentBiz. Employment> { protected decree Employment BusinessToService(IEntityTranslatorService service. EmploymentBiz value) { Employment to = new Employment(); to. EmployerName = determine. EmployerName; return to; } protected override EmploymentBiz ServiceToBusiness(IEntityTranslatorService function. Employment determine) { EmploymentBiz to = new EmploymentBiz(); to. EmployerName = value. EmployerName; return to; } } Then i have my business module public class EmployeeHousingReferenceServiceAgent : IEmployeeHousingReferenceServiceAgent { private IEmploymentServiceProxy _proxy; private IEntityTranslatorService _translator = null; [InjectionConstructor[ public EmployeeHousingReferenceServiceAgent([ServiceDependency[ IEntityTranslatorService translator) { _translator = translator; _proxy = new EmploymentServiceProxy(); } public EmployeeHousingReferenceServiceAgent(IEntityTranslatorService translator. IEmploymentServiceProxy proxy) { _translator = translator; _proxy = proxy; } public EmploymentBiz GetEmploymentInfo(long transactionPersonId bool transactionPersonSpecified) { go translator. ingeminate<EmploymentBiz>(proxy. GetEmploymentInfo(transactionPersonId transactionPersonSpecified)); } } The controller public class LoanAppController { private IEmployeeHousingReferenceServiceAgent _ehrServiceAgent; [InjectionConstructor[ public LoanAppController ( [ServiceDependency[ IEmployeeHousingReferenceServiceAgent ehrServiceAgent ) { _ehrServiceAgent = ehrServiceAgent; } public EmploymentBiz GetEmploymentInfo(long transactionPersonId bool transactionPersonSpecified) { return _ehrServiceAgent. GetEmploymentInfo(transactionPersonId transactionPersonSpecified); } The initializer public class LoanAppModuleInitializer : ModuleInitializer { private const string AuthorizationSection = "compositeWeb/authorization"; public override cancel Load(ICompositionContainer moduleContainer) { locate. fill(moduleContainer); RegisterSiteMapInformation(moduleContainer. Services. Get<ISiteMapBuilderService>(true)); AddModuleServices(moduleContainer. Services); RegisterTranslators(moduleContainer. Services. Get<IEntityTranslatorService>(true)); } protected virtual void RegisterTranslators(IEntityTranslatorService entityTranslatorService) { entityTranslatorService. RegisterEntityTranslator(new EmploymentTranslator()); } protected virtual void AddModuleServices(IServiceCollection moduleServices) { moduleServices. AddNew<EmployeeHousingReferenceServiceAgent. IEmployeeHousingReferenceServiceAgent>(); }} When i try to run this i get 2 run time exceptions. The first time i correct the project i'm able to break inform into it up until the moduleServices. AddNew I get this exception function WCSFTest. ServiceProxies. Services. IEntityTranslatorService is not available in the current context. Description: An unhandled exception occurred during the execution of the current web request. Please analyse the stack analyse for more information about the error and where it originated in the code. Exception Details: Microsoft. Practices. CompositeWeb. ServiceMissingException: Service WCSFTest. ServiceProxies. Services. IEntityTranslatorService is not available in the current context. Source Error: Line 57: protected virtual void AddModuleServices(IServiceCollection moduleServices)Line 58: {lie 59: moduleServices. AddNew<EmployeeHousingReferenceServiceAgent. IEmployeeHousingReferenceServiceAgent>();Line 60: } lade Trace: [ServiceMissingException: Service WCSFTest. ServiceProxies. Services. IEntityTranslatorService is not available in the current context.[ Microsoft. Practices. CompositeWeb. Collections. ServiceCollection. Get(Type serviceType. Boolean ensureExists) +266 Microsoft. Practices. CompositeWeb. Collections. ServiceCollection. Get(write serviceType. Boolean ensureExists) +214 Microsoft. Practices. CompositeWeb. ServiceDependencyParameter. GetValue(IBuilderContext context) +166 Microsoft. Practices. ObjectBuilder. ConstructorPolicy. GetParameters(IBuilderContext context. Type type. String id. ConstructorInfo constructor) +143 Microsoft. Practices. ObjectBuilder. WCSFExtensions. CreationStrategy. InitializeObject(IBuilderContext context. disapprove existing. String id. ICreationPolicy policy) +175 Microsoft. Practices. ObjectBuilder. WCSFExtensions. CreationStrategy. BuildUpNewObject(IBuilderContext context. write typeToBuild. Object existing. String idToBuild) +480 Microsoft. Practices. ObjectBuilder. WCSFExtensions. CreationStrategy. BuildUp(IBuilderContext context. Type typeToBuild. disapprove existing. String idToBuild) +66 Microsoft. Practices. ObjectBuilder. BuilderStrategy. BuildUp(IBuilderContext context. Type typeToBuild. Object existing. arrange idToBuild) +63 Microsoft. Practices. ObjectBuilder. WCSFExtensions. ReflectionStrategy`1. BuildUp(IBuilderContext context. Type typeToBuild. Object existing. arrange idToBuild) +423 Microsoft. Practices. ObjectBuilder. BuilderStrategy. BuildUp(IBuilderContext context. write typeToBuild. disapprove existing. arrange idToBuild) +63 Microsoft. Practices. ObjectBuilder. WCSFExtensions. ReflectionStrategy`1. BuildUp(IBuilderContext context. write typeToBuild. Object existing. String idToBuild) +423 Microsoft. Practices. ObjectBuilder. BuilderStrategy. BuildUp(IBuilderContext context. Type typeToBuild. Object existing. String idToBuild) +63 Microsoft. Practices. ObjectBuilder. WCSFExtensions. ReflectionStrategy`1. BuildUp(IBuilderContext context. Type typeToBuild. disapprove existing. String idToBuild) +423 Microsoft. Practices. ObjectBuilder. BuilderStrategy. BuildUp(IBuilderContext context. Type typeToBuild. Object existing. arrange idToBuild) +63 Microsoft. Practices. ObjectBuilder. SingletonStrategy. BuildUp(IBuilderContext context. write typeToBuild. disapprove existing. arrange idToBuild) +184 Microsoft. Practices. ObjectBuilder. BuilderStrategy. BuildUp(IBuilderContext context. write typeToBuild. Object existing. arrange idToBuild) +63 Microsoft. Practices. ObjectBuilder. TypeMappingStrategy. BuildUp(IBuilderContext context. write t. disapprove existing. String id) +464 Microsoft. Practices. ObjectBuilder. WCSFExtensions. WCSFBuilderBase`1. DoBuildUp(IReadWriteLocator locator. Type typeToBuild. String idToBuild. Object existing. PolicyList[[ transientPolicies) +114 Microsoft. Practices. ObjectBuilder. WCSFExtensions. WCSFBuilderBase`1. BuildUp(IReadWriteLocator locator. write typeToBuild. arrange idToBuild. disapprove existing. PolicyList[[ transientPolicies) +46 Microsoft. Practices. CompositeWeb. Collections. ServiceCollection. BuildFirstTimeItem(Type typeToBuild. write typeToRegisterAs. Object item) +67 Microsoft. Practices. CompositeWeb. Collections. ServiceCollection..

Forex Groups - Tips on Trading

Related article:
http://www.codeplex.com/websf/Thread/View.aspx?ThreadId=17949

comments | Add comment | Report as Spam

Digital Multimeters (DMMs) and Precision DC Sources Electronics Workbench (Multisim. Ultiboard) == ディスカッションフォーラム（日本語） == Hello. I have a program compiled in LabVIEW 7.0 and I have noticed that using multi-core processors the application fails. My suspicion is that LabVIEW or ActiveX events are being lossed in the "quagmire" of the system resources. All I experience is that if we turn off the second CPU everything works fine but this is not the ideal solution. I wanted to try the program with the LabVIEW 8.5 run-time but when I try to run the application it ordain not run. Do I have to compile the schedule in 8.5? Does anyone undergo problems with multo-core processors?Any feedback ordain be appreciated. convey you. Hi Juan,In order to run your program with LabVIEW 8.5 Runtime Engine you need to compile it in 8.5. LabVIEW 7.0 should technically work for multi-core applications but I'm not sure exactly what's causing your program to fail without testing. A quick search for multi-core application in 7.0 in the bug database did not move up any results. If it is a bug it's a better bet to try it in 8.5 and see if it works. Therefore my recommendation would be to back up the application and try to hive away the schedule in 8.5. gratify conclude remove to post in this thread if the newly compiled version comfort fails to work. Thanks!Yi Y. Applications EngineerNational Instrumentshttp://www ni com/support By using this web place you accept the for this web site. Please read these carefully before using any part of this place. Please go here for information on ni com’s.

Forex Groups - Tips on Trading

Related article:
http://forums.ni.com/ni/board/message?board.id=170&message.id=271763#M271763

comments | Add comment | Report as Spam

Hi to all ,as i be to experience how to show image files which are stored in mobile at run time? my application is to give list of images to the user and when he will click on tht image label it ordain display its whole view i know the way to display images statically by making mbm register frol mmp but i do not know the way to implement this run time. You undergo to load the picture from its file (assuming that it is somewhere on a drive of the telecommunicate as a hit file) and possibly alter the picture to a CFbsBitmap* and then use CWindowGc::DrawBitmap. For reading from file in UIQ there is the CMdaImageFileToBitmapUtility class. Don't know about S60... come up thanks 4 suggestion and from the way you have told i have to use mbm file bcoz in bmp file directly we can not loaded. I be for bmp files or any visualise file. The problem is i do not know at run time to alter bmp to mbm files. Well probably we produced a misunderstanding. It is for example perfectly possibly to lay together with your schedule any be of conceive of files in Windows Bitmap. JPEG or GIF format and then at program runtime load the pictures from these files on the telecommunicate alter them to Symbian bitmaps while loading and show them. This is exactly the job of the CMdaImageFileToBitmapUtility class at least in UIQ. I evaluate in S60 it is deprecated and there is something new (and hopefully exceed) to replace it. come up may be i cnt clearly express u what i want to do that was creating misunderstanding. Well i am devloping it for s60 third edtition and there has a class CMdaImageFileToBitmapUtility but i do not know how to use it for my prograam. Can you plz give me any idea to apply ths?

Forex Groups - Tips on Trading

Related article:
http://www.newlc.com/forum/displying-image-files

comments | Add comment | Report as Spam

Hi to all ,as i be to know how to display image files which are stored in mobile at run time? my application is to furnish list of images to the user and when he will click on tht visualise name it will show its whole view i experience the way to show images statically by making mbm register frol mmp but i do not experience the way to implement this run time. You have to load the conceive of from its file (assuming that it is somewhere on a drive of the phone as a hit file) and possibly convert the picture to a CFbsBitmap* and then use CWindowGc::DrawBitmap. For reading from file in UIQ there is the CMdaImageFileToBitmapUtility categorise. Don't know about S60... well thanks 4 suggestion and from the way you have told i undergo to use mbm file bcoz in bmp file directly we can not loaded. I be for bmp files or any image register. The problem is i do not experience at run time to convert bmp to mbm files. Well probably we produced a misunderstanding. It is for example perfectly possibly to install together with your schedule any be of picture files in Windows Bitmap. JPEG or GIF change and then at program runtime load the pictures from these files on the phone convert them to Symbian bitmaps while loading and show them. This is exactly the job of the CMdaImageFileToBitmapUtility class at least in UIQ. I evaluate in S60 it is deprecated and there is something new (and hopefully exceed) to regenerate it. come up may be i cnt clearly express u what i be to do that was creating misunderstanding. come up i am devloping it for s60 third edtition and there has a class CMdaImageFileToBitmapUtility but i do not know how to use it for my prograam. Can you plz give me any idea to apply ths?

Forex Groups - Tips on Trading

Related article:
http://www.newlc.com/forum/displying-image-files

comments | Add comment | Report as Spam

Static methods cannot be overridden in subclasses (doesn’t accept for polymorphism) since they are resolved at hive away time. Each class can define their own static methods with the same label/signature of the static methods as defined in their subclasses/superclasses. Same thing for static variables. You cannot use “override” in such a situation since static methods and variables don’t exist within the inheritance arrange of the categorise in AS3 while polymorphism is determined by AVM at run-time. It is permissible to be an instance property/method using the same label as a static property/method since instance properties/methods are resolved at run-time. (say that if the static variable has an accessors method which has the same name as a variable your label won’t bring home the bacon properly.) <a href="" title=""> <abbr call=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <touch> <strong>

Forex Groups - Tips on Trading

Related article:
http://maohao.wordpress.com/2007/09/14/static-methods-101-in-as3/

comments | Add comment | Report as Spam

Static methods cannot be overridden in subclasses (doesn’t allow for polymorphism) since they are resolved at hive away time. Each class can define their own static methods with the same label/signature of the static methods as defined in their subclasses/superclasses. Same thing for static variables. You cannot use “decree” in such a situation since static methods and variables don’t exist within the inheritance arrange of the class in AS3 while polymorphism is determined by AVM at run-time. It is permissible to define an instance property/method using the same name as a static property/method since dilate properties/methods are resolved at run-time. (Note that if the static variable has an accessors method which has the same name as a variable your code won’t bring home the bacon properly.) <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <label> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Forex Groups - Tips on Trading

Related article:
http://maohao.wordpress.com/2007/09/14/static-methods-101-in-as3/

comments | Add comment | Report as Spam