community edition

On October 29 2007. Vyatta announced the latest release of its open-source networking software. The Vyatta Community Edition (VC3) software combines router firewall and VPN capabilities into an integrated solution that delivers twice the performance of proprietary network solutions at half the price. The latest release. Vyatta Community Edition 3 (VC3) provides substantial enhancements and feature additions from the previous VC2 release including IPSec VPN multi-link PPP and BGP scaling and security. IPSec VPN Vyatta now supports dedicated site-to-site (branch-to-branch or branch-to-HQ) virtual private networking and supports the most widely used cryptographic algorithms including 3DES. AES (128 and 256-bit). MD5 and SHA1. In addition. IPsec VPN can now be configured in a cluster of multiple Vyatta units with failover mechanisms providing high availability for mission-critical services. Multi-link PPP (MLPPP) MLPPP allows customers to increase WAN bandwidth by using multiple low-speed circuits in parallel enabling a Bandwidth optimization by using multiple connections to increase bandwidth. BGP scaling and security enhancements Improved BGP scaling provides faster routing convergence with many peers. MD5-based neighbor authentication delivers improved routing security. Per-BGP peer policy support makes it easier than ever to control route propagation. New monitoring and troubleshooting commands make Vyatta easier to use. Vyatta Community Edition (VC3) is now available for download from. Vyatta is planning to release a new version of its software every 6 months. If you're new here you may want to subscribe to my. Thanks for visiting! © 2008 All Trademarks are the property of their respective owners. DISCLAIMER: All the information troubleshooting methods utilities offered in this website is provided AS-IS without any warranty. Though I strive for perfection and always test the validity and effectiveness of the troubleshooting content. I assume no responsibility for your use of these Fixes. Utilities and other troubleshooting advice. The author will not be liable for any special incidental consequential or indirect damages due to loss of data or any other reason. All use is completely at your own risk by

Forex Groups - Tips on Trading

Related article:
http://www.itsyourip.com/opensource-router/vyatta-community-edition-3-vc3-released/

comments | Add comment | Report as Spam

So leave it to the Mozilla Corporation to find a way to hire the beat talent the world has to offer (AKA Seo Sanghyeon) tasking him with building a better IronPython than change surface IronPython itself. Don’t think that’s possible? Wow. You don’t know Seo desire I know Seo do you? FePy communicate aims to provide enhancements and add-ons for IronPython. FePy communicate documents two developments not included in this release. Files under trunk/pyprof/ which tries to apply sys setprofile with Mono profiler API. (Thanks to Miguel de Icaza and Paolo Molaro for back up.) Files under remove/ which benchmarks simple IronPython programs to measure develop of Mono runtime. This release comes with both IronPython 1.1 and IronPython 2.0 Alpha 5. IronPython 1 x is shelter on Mono. IronPython 2 x isn’t. For example importing string module will crash runtime for Mono 1.2.5. (But os module works fine which is much more complex. It’s a bit of hit and miss.) This channel is built with Mono 1.2.5.1. The minimum Mono version needed to compile and run for IronPython 1 x is 1.2.3. For IronPython 2 x it’s 1.2.5. Mono 1.2.5 and 1.2.5.1 are same object for ASP. NET bugfixes. DLR-based languages won’t work with Mono versions before 1.2.5. Please check your Mono version before reporting any problems. Changes in this release follow. Contributions are credited in parentheses. Following modules are now included: decimal modulefinder pkgutil smtplib pystone benchmark. (It’s under Lib/test.) irclib which works great. Try this example as a sanity test. For 2 xpatch-{325478,328022,333647} # Numbers refer to Mono bugspatch-consolepatch-cs0177patch-debug-definepatch-initialize-builtins Use NAnt to build IronPython 2 x. Use quilt to bring home the bacon patches. Patches to build all IronPython 2 Alpha releases.- AssemblyVersion cs was missing in Alpha 3. (Miguel de Icaza)Include both IronPython 1 x and 2 x but overlap the library using site py. Weblog authors are solely responsible for the content and accuracy of their weblogs including opinions they express and O’Reilly Media. Inc. disclaims any and all liability for that circumscribe its accuracy and opinions it may contain.

Forex Groups - Tips on Trading

Related article:
http://www.oreillynet.com/windows/blog/2007/10/seo_sanghyeonipce_ironpython_c_3.html?CMP=OTC-U49S05779020&ATT=Seo+Sanghyeon+IPCE+IronPython+Community+Edition+r7+Now+Available

comments | Add comment | Report as Spam

So get it to the Mozilla Corporation to sight a way to hire the best talent the world has to furnish (AKA Seo Sanghyeon) tasking him with building a better IronPython than even IronPython itself. Don’t think that’s possible? Wow. You don’t know Seo desire I know Seo do you? FePy project aims to give enhancements and add-ons for IronPython. FePy communicate documents two developments not included in this channel. Files under trunk/pyprof/ which tries to apply sys setprofile with Mono profiler API. (Thanks to Miguel de Icaza and Paolo Molaro for help.) Files under bench/ which benchmarks simple IronPython programs to measure develop of Mono runtime. This release comes with both IronPython 1.1 and IronPython 2.0 Alpha 5. IronPython 1 x is stable on Mono. IronPython 2 x isn’t. For example importing arrange module will crash runtime for Mono 1.2.5. (But os module works book which is much more complex. It’s a bit of hit and miss.) This release is built with Mono 1.2.5.1. The minimum Mono version needed to compile and run for IronPython 1 x is 1.2.3. For IronPython 2 x it’s 1.2.5. Mono 1.2.5 and 1.2.5.1 are same except for ASP. NET bugfixes. DLR-based languages won’t work with Mono versions before 1.2.5. gratify check your Mono version before reporting any problems. Changes in this release follow. Contributions are credited in parentheses. Following modules are now included: decimal modulefinder pkgutil smtplib pystone benchmark. (It’s under Lib/test.) irclib which works great. Try this example as a sanity evaluate. For 2 xpatch-{325478,328022,333647} # Numbers refer to Mono bugspatch-consolepatch-cs0177patch-debug-definepatch-initialize-builtins Use NAnt to build IronPython 2 x. Use conjoin to manage patches. Patches to create all IronPython 2 Alpha releases.- AssemblyVersion cs was missing in Alpha 3. (Miguel de Icaza)Include both IronPython 1 x and 2 x but share the library using site py. Weblog authors are solely responsible for the content and accuracy of their weblogs including opinions they convey and O’Reilly Media. Inc. disclaims any and all liability for that circumscribe its accuracy and opinions it may include.

Forex Groups - Tips on Trading

Related article:
http://www.oreillynet.com/windows/blog/2007/10/seo_sanghyeonipce_ironpython_c_3.html?CMP=OTC-U49S05779020&ATT=Seo+Sanghyeon+IPCE+IronPython+Community+Edition+r7+Now+Available

comments | Add comment | Report as Spam

Hello!I would desire to know if it is possible to integrate a web service in an element of a xForm (integrate a web service who list all the data of my MySql database in a comboBox for example)?Thanks Hi it is possible to make a call to a webservice and map the output of the label to an element of the form so that the data is displayed. Thanks,Antoine Hi,Please have a look on the attached process that is an answer to your ask. Inorder to execute this process please follow the below given points:MySQL Database:All you need to undergo a table with two fields (Name & Designation) in MySQL-5 mysql> create table employee (Name varchar (20). Designation varchar (12));mysql> insert into employee values (‘xxxxx’ ‘xxxxx’); Designer1. To configure jdbc connection:Refer to the compose guides>Intalio|BPMS Connector for JDBC 2. Create Database Connection with the label as Process. ThanksChandra register Attachment: register label: File Size: 24254 HiThat was exactly the scenario that I was interested in too. How are you deploying the webservice inside the Intalio Environment?Thanks very much.

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_fireboard/Itemid,113/func,view/id,9639/catid,27/

comments | Add comment | Report as Spam

The latest 3.0 version supports IPSec VPNs between enterprise sites using 3DES and AES encryption (128 and 256 bit key length) among others. Vyatta can also handle Multilink PPP and is thus capable of using multiple physical connections between two systems – modem and ISDN for example – in order to increase bandwidth and data throughput for data transmissions. The developers have also optimized the Border Gateway Protocoll (BGP) to support faster routing. The new version is available from the Vyatta website.

Forex Groups - Tips on Trading

Related article:
http://www.linux-magazine.com/online/news/new_version_of_vyatta_community_edition

comments | Add comment | Report as Spam

Something remarkable is happening with online public video sharing platforms: progressive non-profit groups worldwide are seizing their cater to do good. YouTube started off more desire the people’s version of funniest home videos. But it’s no longer confined to that category. Activist and social groups are increasingly uploading their videos. As broadband Internet rolls out around the world more people are actually able to check these videos online. In response. YouTube owned by examine giant Google is creating a special divide for nonprofits to air their videos and link them to its Google Checkout online payment system to receive funds directly. “Nonprofits understand that online video isn’t just a way to air public service announcements on a shrunken TV set,” Reuters quoted Steve Grove head of news and politics at YouTube as saying. “It’s a way to get people to do more than just absorb your communicate but to engage with their user generated circumscribe as come up.” Pure Digital maker of the turn video camera has said it plans to give away a million video cameras to non-profit organizations around the world to interpret images and moments in places traditional media outlets might not be able to reach. “Video has cater and media has cater but the challenge is that the media is limited to telling stories that are controlled by a very small be of populate,” Jonathan Kaplan chief executive of Pure Digital told Reuters. “This program along with YouTube and other sites will grow the media universe for learning what’s really going on in the world,” he said. tour FlipVideo website on give for non-profit groups —>~ WASHINGTON — Most days. Xiang Dong leads a life typical of this city’s suburban office worker. But at nights he takes on another persona: China dissident. The bespectacled Mr. Xiang a 38-year-old father of two hosts a unify of weekly talk shows for a U. S.-based satellite-TV broadcaster called New Tang Dynasty Television. Setting up at a bare-bones studio at a high school one night he fiddled with his laptop-cum-teleprompter. “I forgot my power cord,” sighed Mr. Xiang who works as a database manager. “I’ll just undergo to believe on batteries.” Making do is the modus operandi for the largely volunteer staff of New Tang Dynasty TV. Yet they are helping build one of the most significant overseas dissident movements to challenge China in decades. Most staffers be to Falun sound a Chinese spiritual-and-meditation movement banned by Beijing as an “evil cult.” What started as an effort by U. S.-based Falun Gong practitioners — many immigrants from China — to communicate out against a government crackdown back domiciliate has evolved into a broadcaster with big aspirations. …New Tang Dynasty’s revenues were $4.7 million in 2005 according to its Internal Revenue Service filings as a nonprofit. Mr. Lee says last year’s revenues were about $5 million and that they ordain increase to $6 million or $7 million this year. For Chinese officials and other Falun sound opponents the growing affect of NTD is evidence of their longstanding assertion that the assort was never just a spiritual movement. NTD and its sister organizations inform frequently on Falun Gong-related news and often cerebrate on contradict news out of China. They have also sometimes played up stories discredited by Western media and human-rights groups such as China’s alleged systemic harvesting of the organs of detained Falun Gong practitioners for use in transplants. At the same time. NTD’s programs broadcast in Chinese and English address issues that be largely off-limits to China’s state-controlled media from political corruption to the move of the infectious disease SARS in the country in 2003. During elections in the U. S and Taiwan. NTD beamed live feeds to show democracy in challenge and is gearing up to do the same for the 2008 U. S presidential race. The broadcaster also airs movies cooking shows a sports program and other entertainment. … Mr. Xiang decided to cerebrate on producing TV shows. In July 2000 he enrolled in evening classes offered by Fairfax Public Access a nonprofit organization providing media-production facilities. One of his first programs to air on Fairfax Public find’s Channel 10 was a minidocumentary about Falun Gong adherents. “Our teacher watched it and said it could be more professional,” Mr. Xiang says. Undeterred he produced more programs featuring Falun sound followers. —>~ Next Tuesday in Barcelona. Spain. I’ll be teaming up with J-Lab’s Jan Schaffer to furnish a talk on Participatatory Journalism in the USA: Opportunities and Challenges. This is part of the fourth. I’m really excited about it. I desire Jan could actually be there but she ended up not being able to attend in person so she’ll be giving her communicate via webcast. After Jan gets to answer some questions live (technology permitting). I’ll expand this discussion by talking about the bigger picture: Why participatory journalism matters why it isn’t new and how the news landscape might evolve because of participatory journalism. What follows is merely my beat anticipate about how my part of the talk ordain go. Of cover. I don’t really do speeches; I prefer to engage groups in conversation so we can explore issues and think things through together. That’s much more fun for everyone. So I will most definitely go from this compose at some inform during the talk. (So translators be forewarned!) With that here’s what I’d like to be able to adjoin —>~ The guests at the Nov. 7 ribbon cutting for the facility located in the BHS media center included two superintendents-John Goetz who retired from that lay in August and his successor. Anthony Bivona. Departing First Selectman Jerry Murphy also attended the event to celebrate the opening of the studio which was the brainchild of Carol Dores a parent and the fail and president of the BEF. “They were using the equipment as it came out of the boxes,” she said in an converse regarding how the facility has already generated student interest. During the 35-minute ceremony the audience viewed a video produced by a student that highlighted the civic programs that the BEF has helped fund since it was established in 2004. Another video included an interview with Cherrie Wilhelm the head of the guidance program at BHS. …Mrs. Dores said that the studio would provide more programming on municipal- and school-related events for community access channels 17 and 21. —>~ Tualatin Valley Community Television recently received two top prizes at the 22nd Annual Government Programming Awards presented by the National Association of Telecommunications Officers and Advisors. TVC-TV won a first-place trophy for community events coverage for its video following Lake Oswego’s Rivergrove Elementary Schools Lego Robotics team through the 2006 Lego-Robotics tournament in Hillsboro. Coverage of the 2007 North Plains Garlic Festival schedule placed third in the same category. The festival showcases garlic and garlic infused foods and activities. —>~ Volunteers and staff from Waycross Community Media took top honors in the 2007 Philo T. Farnsworth Access Awards. Awards were presented in a ceremony Nov. 9 at the annual Alliance for Community Media Central States Fall Regional Conference held this year in assemble Wayne. Ind. Volunteers and cater from Waycross.

Forex Groups - Tips on Trading

Related article:
http://rghm.wordpress.com/2007/11/17/community-media-selected-clippings-111607/

comments | Add comment | Report as Spam

I spoke with one of Scalix's resellers and learned some interesting details about plans. I briefly looked through the forum and open nothing to confirm them and I hate going on hearsay so. 1.) Does 11.3 indeed solve the SWA slowness issues2.) Is the community licensing going to only include 10 premium users instead of 253.) What other changes undergo been made (in-line images in SWA? more tools in the SAC for jobs only accessable by commandline before? a richer set of plug-ins?)I am particularly hoping that the community version's licensing is not going to chage as this will pretty much end my relationship with Scalix personally and my prevent the beta wave at the hospital where I work (schedule next month) as there will not be enough Outlook connectors to furnish my poweruser group a show at what Scalix can do. As this is supposidly going to his the 10th of this month and I always like to change state my show early. I couldn't back up but ask away. Napoleon,thanks for your communicate and interest in Scalix. Quite obviously we're always looking at how to act the our product forward and as with any release. 11.3 will come with a number of changes. The list of things is however not final yet and therefore I'm surprised why any of our partners would communicate this before we undergo communicated anything official to them - which for the changes in 11.3 hasn't been done yet. We're planning on a furnish webcast this coming week - and that ordain be the first round of communication about that product channel. The presentation slides for this are not finished yet and indeed I'm meeting with a couple people this coming Monday to finalize. Therefore if I may ask could you possibly give me with the label of the reseller that you talked to? I'll want to make sure that they attend this upcoming webcast so that they are completely up to go out with what we're coming up with. As I've stated before on the forum. Scalix 11.3 ordain have a number of additional features key ones being CalDAV support. Outlook-over-SSL functionality and support for Outlook 2007 plus some more. SWA ordain get it's share - next to a be of issues that were fixed in this release it will undergo more flexible handling of additional LDAP directories and communicate books better localization support for the recite checker and some usability enhancements. It ordain also be less picky with the browsers you may run it on now allowing you to use SWA on all Gecko-based browsers not only Firefox 2. Couple of things are being worked on final list t b d. Performance improvements are always on the agenda - we're currently looking into documenting all best practices for tuning Tomcat. Postgres and the SWA configuration for optimum performance - turns out that this has quite a big impact. We've also significantly reduced the fill times for the login window and the initial screen; while this will be included in 11.3 for everyone commercial customers with active give Contracts using Small Business and Enterprise Edition can get a patch for SWA 11.2 from Scalix Support today. All-in-all. 11.3 will provide significant determine to all users of Scalix including those on Community Edition. We've indeed decided to alter some adjustments to the licensing after almost a year of discussion around this and getting a significant be of feedback from partners customers and community users alike. This started come up before Scalix was acquired by Xandros and I've been personally driving this send ever since. I can confirm that reducing the number of free premium users in Community Edition is move of the intend. We have not taken the decision lightly and I'd like to talk about this some more soon and in the larger context of describing the added determine of 11.3 across all editions of the product. Stay tuned. By the way we're planning to channel 11.3 in early/mid December so nothing from our side is planned for the 10th of this month. As a side remark. I cannot see how any change in community edition licensing would ever affect a pilot within an organisational context. For testing purposes it is possible to get a 60 day. 25 user license key for Enterprise Edition right off the website. If you be more users or an extended evaluation period gratify contact our sales aggroup and we'll be happy to help. Hope this helps,cheers,Florian._________________Florian von Kurnatowski product guy and community geek*** Scalix 11.2 available now - get it at - Scalix 11.3 coming mid-December *** Good to know about the eval. I guess having used the community edition for my family. I had not considered contacting Scalix directly for an evaluation copy. . Mid December that's a desire time to direct off my project. I look send to seeing the final enumerate. Maybe we could talk you into posting the glide online after next week? I believe I'll go up with the sales rep myself. Like I said. I rarely trust word of mouth. Thanks for the modify! Would the reduction of users in the Community edition apply to existing users? We're running 23 users on the Community edition with plans to act to Small Business edition when we need to. All I experience is if I give my boss the option of paying Scalix money because they are forcing us versus migrating to something else he ordain be so offended we will have to move to something else So the community edition license you're currently running Scalix under for 11.2 and before is perpetual that means you can act running this version forever. You can also install new systems with that version. If we decide to reduce the number of premium users that would become effective starting with a certain release e g. 11.3; that means should you want to grade to this release you would either have to be below the new be of users or move to a commercial version - this would be if you wanted to use the new features in that version. So yes you'd probably be to go commercial if you wanted to upgrade but no noone would force this onto you and you could also choose freely when you would do it.... More soon,Florian._________________Florian von Kurnatowski product guy and community geek*** Scalix 11.2 available now - get it at - Scalix 11.3 coming mid-December *** What do you be in 11.3?I'm assuming it's support for 2007. If that's the case just run the 11.3 connector against the 11.2 server. Now having said that. I suspect you'll sight that Scalix isn't overly expensive and that there's good value when you do pay for it. With that many users you're right on the line anyway so in a fairly reasonable timeline you'll want Small Business anyway. Kev._________________403-616-7677 Please don't advise our users to use the product in unsupported configurations (i e newer MAPI client against older servers). Also strictly speaking using any 11.3 software would be covered by the 11.3 license agreement so client or server would be subject to license conditions as set in the 11.3 EULA so actually you would only - on cover - be licensed to use it inline with that agreement - so if the limit on the number of users changes that would be true for the number of outlook connectors you can use of a particular or future version...... Sorry to be trying to precise here but that's legal stuff and my lawyers... you get the story.- Florian._________________Florian von Kurnatowski product guy and community geek*** Scalix 11.2 available now - get it at - Scalix 11.3 coming mid-December *** Next to the philosophical part of this discussion how would you think we rate on this throughout.

Forex Groups - Tips on Trading

Related article:
http://www.scalix.com/forums/viewtopic.php?p=41767#41767

comments | Add comment | Report as Spam

In the bpms-console I am trying to alter an "In Progress" dilate but when I try to do so it gives me the following error:"Error:alter instance operation failed for instance PIPA(1474562)" with a analyse of org apache ode bpel pmapi. InvalidRequestException: The affect "{http://www alpineinnovations com/BackBoneAlpha/PIPA}PIPA-14" is available at org apache ode bpel engine. ProcessAndInstanceManagementImpl getDebugger(ProcessAndInstanceManagementImpl java:521) at org apache ode bpel engine. ProcessAndInstanceManagementImpl getDebugger(ProcessAndInstanceManagementImpl java:551) at org apache ode bpel engine. ProcessAndInstanceManagementImpl terminate(ProcessAndInstanceManagementImpl java:384) at sun reflect. NativeMethodAccessorImpl create0(Native Method) at sun reflect. NativeMethodAccessorImpl invoke(NativeMethodAccessorImpl java:39) at sun designate. DelegatingMethodAccessorImpl create(DelegatingMethodAccessorImpl java:25) at java lang designate. Method create(Method java:585) at org apache ode jca server rmi. RmiPipeServerImpl invokeConnectionMethod(RmiPipeServerImpl java:89) at sun designate. GeneratedMethodAccessor242 create(Unknown Source) at sun designate. DelegatingMethodAccessorImpl invoke(DelegatingMethodAccessorImpl java:25) at java lang designate. Method create(Method java:585) at sun rmi server. UnicastServerRef dispatch(UnicastServerRef java:294) at sun rmi transport. displace$1 run(Transport java:153) at java security. AccessController doPrivileged(Native Method) at sun rmi displace. displace serviceCall(Transport java:149) at sun rmi transport tcp. TCPTransport handleMessages(TCPTransport java:466) at sun rmi transport tcp. TCPTransport$ConnectionHandler run(TCPTransport java:707) at java lang. go run(Thread java:595)Also if I try to suspend it itakes me a a genError htm summon that says:We are sorry for inconvenience but the summon you are looking for is unavailable. approve or Go to Login page Hi,What is the version of Intalio|BPMS you're using? Since the problem is not reprodcable in which you can alter an inprogress instance from console easily be selecting it in the list of instances. Thanks,Shivanand. Shivanend,I'm using intalio-bpms-5.0.0.059. There might be something strange going on with my setup (either of Intalio or possibly java as I act getting java lang nullPointer exceptions when I'm using the Intalio Designer also). I'll uninstall and reinstall things to see if it helps.(for me. I was in the console and I would click on the checkbox next to a affect. It would show a checkmark but then when I went and clicked the alter button it would furnish me the error.) Today I tried it again and it works. I had tried rebooting my forge yesterday in case it was due to my forge crashing and it didn't seem to back up. I uninstalled intalio server and reinstalled it and things be to be working now (I don't know that it was Intalio server's accuse. I think my JVM was having problems and might have corrupted some things) I think I've figured it out. I had "undeployed" some of my processes and the instances that wouldn't alter were instances of those processes. If this proves to be what happened it would be a good idea that when the admin undeploys a process intalio would delete any corresponding instancess. (Either that or express the admin that they need to go and delete the corresponding instances before they can undeploy the process)The reason why I was able to get it working as of my measure affix was that I had removed intalio and reinstalled it. I had then deployed a process and started instances of it. I was then able to terminate the instances (because the affect was still deployed)affix edited by: jmo7 at: 2007/09/13 15:24affix edited by: jmo7 at: 2007/09/13 15:25affix edited by: jmo7 at: 2007/09/13 15:25 Also it looks like if you use the bpms-console to terminate an instance the tasks related to that dilate comfort show up in the workflow manager but when you try to run them they error out. So I'd declare a similar thing as in my last affix in the thread - when an instance is terminated in the console the tasks associated with it should a) displace out of the tasksl isted in the workflow manager (possibly with a message to the workflow user) orb) a warning should be given to the admin saying you can't alter this because there are tasks currently listed in the workflow manager (this wouldn't make much comprehend because then you couldn't terminate instances early as they will always have some assign waiting to be fulfilled). Hope this helps,Jeff

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8647/catid,5/

comments | Add comment | Report as Spam

I undergo a affect with intalio 5 create and deploy are good but when I test this process with console. I have a problem with mapping fault:exceptionClass: org apache axis2. AxisFaultmessage: {http://schemas xmlsoap org/ws/2004/03/business-process/}selectionFailure No results for expression: {OXPath10Expression $intfF2V5_DE_Asc_ConsultaDeClienteRequestMsg in0/RIF}I review everything but I cannot sight where this the problem. I had problems with the namespace at first soon separates in xml schemas. Some idea to understand this?Tks. File Attachment: File Name: register Size: 37188 Julio it looks desire avariable was not initialized properly so it is throwing an exception that the XPath ask cannot access the node RIF under the variable $intfF2V5_DE_Asc_ConsultaDeClienteRequestMsg in0. I cannot run this process as it is using a webservice that you have only on your side. You should look at the variables in the data tab of the dilate and see what that variable looks like. If it wasn't initialized properly you may override the default initialization in the mapper. I wish this helps. Antoine Julio the XPath query is not working as I stated above because it fails to ask the variable. If you want more help regarding your problem please contact our professional services. They will be able to give you with more assistance and a training on our tools. I hope this helps. Antoine

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8645/catid,22/

comments | Add comment | Report as Spam

I undergo a process with intalio 5 build and deploy are good but when I test this process with console. I have a problem with mapping fault:exceptionClass: org apache axis2. AxisFaultmessage: {http://schemas xmlsoap org/ws/2004/03/business-process/}selectionFailure No results for expression: {OXPath10Expression $intfF2V5_DE_Asc_ConsultaDeClienteRequestMsg in0/RIF}I review everything but I cannot detect where this the problem. I had problems with the namespace at first soon separates in xml schemas. Some idea to understand this?Tks. File Attachment: register label: File Size: 37188 Julio it looks desire avariable was not initialized properly so it is throwing an exception that the XPath ask cannot access the node RIF under the variable $intfF2V5_DE_Asc_ConsultaDeClienteRequestMsg in0. I cannot run this affect as it is using a webservice that you have only on your side. You should be at the variables in the data tab of the instance and see what that variable looks desire. If it wasn't initialized properly you may decree the default initialization in the mapper. I hope this helps. Antoine Julio the XPath query is not working as I stated above because it fails to query the variable. If you be more back up regarding your problem please communicate our professional services. They ordain be able to give you with more assistance and a training on our tools. I wish this helps. Antoine

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8645/catid,22/

comments | Add comment | Report as Spam

All,I'm almost done with my prototype. (It's fairly simple but it does the job). I need to get the prototype all the way done so I can show it to my managers in the next day or so. Therefore any back up would be greatly appreciated. I've attached a zip of my project. I don't get any errors reported as I make it or when I position it. The affect is basically a series of forms that different people alter out (the later forms show all the information from the earlier forms). I can start the affect and fill out the first form and click the complete button. It processes and all seems to be ok. But when I log into the console it reports that the process has failed at the next step. The error is: Error sending communicate (mex={PartnerRoleMex#786436 [PID {http://www alpineinnovations com/JPM_Process/JPM}JPM-7] calling (...)}): Service not open operation terminated !!The scope says:invoke-implicit-scope-line-800As a note: I am using the workaround discussed in the "'partner cerebrate' errors in BPEL - gratify back up!" topic so I have different namespaces for each of my forms (http://alpineinnovations com/jpmprodship/xform in case it makes any differences. If anyone has any ideas I'd be very grateful. here you goPost edited by: srikanth_kollu at: 2007/09/12 15:00java lang. NullPointerExceptionat com intalio bpms designer bpmn move. BpmnFolderDocumentProvider setDocumentContentFromStorage(BpmnFolderDocumentProvider java:156)at org eclipse gmf runtime diagram ui resources editor ide document. StorageDocumentProvider setDocumentContent(StorageDocumentProvider java:152)at org eclipse gmf runtime draw ui resources editor ide enter. FileDiagramDocumentProvider setDocumentContent(FileDiagramDocumentProvider java:273)at org eclipse gmf runtime diagram ui resources editor ide document. StorageDocumentProvider createDocument(StorageDocumentProvider java:76)at org eclipse gmf runtime diagram ui resources editor ide enter. FileDocumentProvider createElementInfo(FileDocumentProvider java:476)at org eclipse gmf runtime diagram ui resources editor document. AbstractDocumentProvider cerebrate(AbstractDocumentProvider java:387)at org brood gmf runtime draw ui resources editor parts. DiagramDocumentEditor doSetInput(DiagramDocumentEditor java:426)at org eclipse gmf runtime diagram ui resources editor parts. DiagramDocumentEditor setInput(DiagramDocumentEditor java:389)at org brood gef ui parts. GraphicalEditor init(GraphicalEditor java:318)at org eclipse gmf runtime diagram ui parts. DiagramEditor init(DiagramEditor java:638)at org eclipse gmf runtime diagram ui resources editor parts. DiagramDocumentEditor init(DiagramDocumentEditor java:116)at com intalio bpms designer bpmn part. IntalioDiagramEditor init(IntalioDiagramEditor java:255)at org brood ui internal. EditorManager createSite(EditorManager java:842)at org brood ui internal. EditorReference createPartHelper(EditorReference java:583)at org eclipse ui internal. EditorReference createPart(EditorReference java:372)at org eclipse ui internal. WorkbenchPartReference getPart(WorkbenchPartReference java:566)at org brood ui internal. EditorReference getEditor(EditorReference java:214)at org eclipse ui internal. WorkbenchPage busyOpenEditorBatched(WorkbenchPage java:2595)at org eclipse ui internal. WorkbenchPage busyOpenEditor(WorkbenchPage java:2528)at org brood ui internal. WorkbenchPage access$10(WorkbenchPage java:2520)at org eclipse ui internal. WorkbenchPage$9 run(WorkbenchPage java:2505)at org brood swt custom. BusyIndicator showWhile(BusyIndicator java:67)at org eclipse ui internal. WorkbenchPage openEditor(WorkbenchPage java:2500)at org brood ui internal. WorkbenchPage openEditor(WorkbenchPage java:2477)at org brood ui ide. IDE openEditor(IDE java:290)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction openDiagram(OpenIntalioDiagramEditorAction java:161)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction$1$1 run(OpenIntalioDiagramEditorAction java:99)at org brood jface operation. ModalContext runInCurrentThread(ModalContext java:369)at org eclipse jface operation. ModalContext run(ModalContext java:313)at org eclipse jface dialogs. ProgressMonitorDialog run(ProgressMonitorDialog java:479)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction$1 run(OpenIntalioDiagramEditorAction java:93)at org eclipse swt widgets. Synchronizer syncExec(Synchronizer java:152)at org eclipse ui internal. UISynchronizer syncExec(UISynchronizer java:28)at org brood swt widgets. Display syncExec(Display java:3763)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction run(OpenIntalioDiagramEditorAction java:89)at com intalio bpms designer dataobject ui viewers. DataObjectViewer handleDoubleClick(DataObjectViewer java:127)at org eclipse ui views navigator. ResourceNavigator$5 doubleClick(ResourceNavigator java:429)at org eclipse jface viewers. StructuredViewer$1 run(StructuredViewer java:796)at org brood.

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8646/catid,5/

comments | Add comment | Report as Spam

All,I'm almost done with my prototype. (It's fairly simple but it does the job). I need to get the prototype all the way done so I can demo it to my managers in the next day or so. Therefore any help would be greatly appreciated. I've attached a zip of my communicate. I don't get any errors reported as I make it or when I deploy it. The process is basically a series of forms that different populate alter out (the later forms show all the information from the earlier forms). I can start the process and fill out the first create and move the end add. It processes and all seems to be ok. But when I log into the console it reports that the process has failed at the next step. The error is: Error sending message (mex={PartnerRoleMex#786436 [PID {http://www alpineinnovations com/JPM_affect/JPM}JPM-7] calling (...)}): Service not open operation terminated !!The scope says:invoke-implicit-scope-line-800As a say: I am using the workaround discussed in the "'furnish cerebrate' errors in BPEL - please help!" topic so I undergo different namespaces for each of my forms (http://alpineinnovations com/jpmprodship/xform in inspect it makes any differences. If anyone has any ideas I'd be very grateful. here you goPost edited by: srikanth_kollu at: 2007/09/12 15:00java lang. NullPointerExceptionat com intalio bpms designer bpmn part. BpmnFolderDocumentProvider setDocumentContentFromStorage(BpmnFolderDocumentProvider java:156)at org brood gmf runtime diagram ui resources editor ide document. StorageDocumentProvider setDocumentContent(StorageDocumentProvider java:152)at org eclipse gmf runtime diagram ui resources editor ide document. FileDiagramDocumentProvider setDocumentContent(FileDiagramDocumentProvider java:273)at org eclipse gmf runtime draw ui resources editor ide document. StorageDocumentProvider createDocument(StorageDocumentProvider java:76)at org brood gmf runtime diagram ui resources editor ide enter. FileDocumentProvider createElementInfo(FileDocumentProvider java:476)at org brood gmf runtime diagram ui resources editor document. AbstractDocumentProvider cerebrate(AbstractDocumentProvider java:387)at org brood gmf runtime diagram ui resources editor parts. DiagramDocumentEditor doSetInput(DiagramDocumentEditor java:426)at org brood gmf runtime diagram ui resources editor parts. DiagramDocumentEditor setInput(DiagramDocumentEditor java:389)at org brood gef ui parts. GraphicalEditor init(GraphicalEditor java:318)at org brood gmf runtime draw ui parts. DiagramEditor init(DiagramEditor java:638)at org eclipse gmf runtime draw ui resources editor parts. DiagramDocumentEditor init(DiagramDocumentEditor java:116)at com intalio bpms designer bpmn part. IntalioDiagramEditor init(IntalioDiagramEditor java:255)at org eclipse ui internal. EditorManager createSite(EditorManager java:842)at org brood ui internal. EditorReference createPartHelper(EditorReference java:583)at org brood ui internal. EditorReference createPart(EditorReference java:372)at org eclipse ui internal. WorkbenchPartReference getPart(WorkbenchPartReference java:566)at org brood ui internal. EditorReference getEditor(EditorReference java:214)at org eclipse ui internal. WorkbenchPage busyOpenEditorBatched(WorkbenchPage java:2595)at org eclipse ui internal. WorkbenchPage busyOpenEditor(WorkbenchPage java:2528)at org eclipse ui internal. WorkbenchPage access$10(WorkbenchPage java:2520)at org eclipse ui internal. WorkbenchPage$9 run(WorkbenchPage java:2505)at org brood swt custom. BusyIndicator showWhile(BusyIndicator java:67)at org eclipse ui internal. WorkbenchPage openEditor(WorkbenchPage java:2500)at org brood ui internal. WorkbenchPage openEditor(WorkbenchPage java:2477)at org brood ui ide. IDE openEditor(IDE java:290)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction openDiagram(OpenIntalioDiagramEditorAction java:161)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction$1$1 run(OpenIntalioDiagramEditorAction java:99)at org brood jface operation. ModalContext runInCurrentThread(ModalContext java:369)at org brood jface operation. ModalContext run(ModalContext java:313)at org eclipse jface dialogs. ProgressMonitorDialog run(ProgressMonitorDialog java:479)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction$1 run(OpenIntalioDiagramEditorAction java:93)at org eclipse swt widgets. Synchronizer syncExec(Synchronizer java:152)at org brood ui internal. UISynchronizer syncExec(UISynchronizer java:28)at org brood swt widgets. show syncExec(show java:3763)at com intalio bpms designer bpmn actions. OpenIntalioDiagramEditorAction run(OpenIntalioDiagramEditorAction java:89)at com intalio bpms designer dataobject ui viewers. DataObjectViewer handleDoubleClick(DataObjectViewer java:127)at org eclipse ui views navigator. ResourceNavigator$5 doubleClick(ResourceNavigator java:429)at org brood jface viewers. StructuredViewer$1 run(StructuredViewer java:796)at org eclipse.

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8646/catid,5/

comments | Add comment | Report as Spam

All,Is there any way to add unique data to each instance of the workflow description of a task?Here's what I mean: I am trying to copy an ordering process. Part of the information entered by the first user of the process is the affiliate name and a sales order number. Later on I undergo a assign being sent to another user with the workflow description of "fill out additional information". I would like to undergo it say "fill out additional information <customername> <salesordernumber>". This is because at any given time there might be dozens of the same assign in a workers task enumerate each one from a different instance. So if the task enumerate looked like this:fill out additional information John Doe 13456alter out additional information Jane Doe 13752alter out additional information James Smith 13798alter out additional information Sam Doe 13568it would be much more helpful than just:alter out additional informationfill out additional informationfill out additional informationfill out additional information Yes you can do this by changing the schema write of workflow element.1. Switch to create Editor perspective & act a new xform.2. Drag and displace any control element from palette (e g text input) select it.3. Go to properties pane extract validation node change determine for Schema write. I wish it helps you. Thanks,Shivanand. Shivanand,Thank you for the reply. I undergo some some additional questions but due to other projects it has taken me some time to come approve to asking these questions. I re-read my affix and have realized I left some information out that might dress the say. I am very sorry. (Or it could be that the say might still be the same and I am just not understanding it ;) Either way thank you for your help)I be the instance-unique information to be added to the workflow description that is populated in the "create" portion of the create and end populate Activity - so that it ordain be in a user's Task enumerate in the ui-wf consoleFor instance in the jpm bpmn in the attached project if you decide the "jpmGrfx-create" assign you will see that it's description is "alter out addtional information". I would desire to change this to "fill out addtional information : " + $VariableNamewith the $VariableName being $xform:initProcessRequest grow taskOutput output. CS. Customer(I know this wouldn't be the correct syntax - but this is the idea). So the determine of Customer (let's say "Johan Dijkstra") coming from the first create that is being fed into the create that is about to be created is also added into the workflow Description of the task. If this task is assigned to a user they would see "fill out addtional information : Johan Dijkstra" in their Task list in the ui-wf console. Or if there is not a way to do this in the bpmn designer is there some other way to accomplish this?Again convey you for all your back up!

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8648/catid,5/

comments | Add comment | Report as Spam

Re:put Intalio workflow UI in Orbeon Portlet (1 viewing) hi all i be to ask where is the xml file of workflow UI --> this page using xform right ?if using xform can i experience the xml file for that UI ?because i want to try that xml using orbeon portletthanks in advancesuganda:) Hi,this application is move based. AFAIK. I wish this helps. Antoine i mean the user interface in intalio bpms manager for login go away affect etc does the user interface using move too ? not xform / html / jsp ?thanksganda:) Hi,this information is not publicly available (yet). We will open the source of that move of the server. Thanks,Antoine

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8640/catid,5/

comments | Add comment | Report as Spam

hi all,yesterday i tried 2 simple samples1 multipleBranching2 simpleBranchingeverything works fine but when i tried to make it false i use brood wtp to evaluate web service that is generated when position that 2 projects the input require arrange that will be converted into doublebut i tried to enter "true"i got exception can't alter adjust into manifold ok i accept that exception in server than i shutdown the server and restart again but when my server is restarting i comfort find that exception in my server log is it a bug ? the server must not saving that error log and retrieve that error log if someone start the server right ?how to delete that error in my server ?i use the latest intalio server and designer

Forex Groups - Tips on Trading

Related article:
http://bpms.intalio.com/component/option,com_joomlaboard/Itemid,1/func,view/id,8641/catid,5/

comments | Add comment | Report as Spam